# Domain Warm-Up: A Practical Plan for a New Sending Domain

> A domain warm-up plan for a new sending domain: the setup checklist, a gradual ramp you can adapt, and what to do when mailbox providers push back.

Canonical: https://www.cresca.xyz/blog/domain-warmup-guide
Author: Lalit Kumar Jangid
Published: 2026-09-14
Last updated: 2026-10-26

When you start sending from a new domain, mailbox providers have no history to judge it by. They do not know whether you are a careful small business or a spammer who registered the domain yesterday. A domain warm-up means building that history deliberately: starting small, mailing the people most likely to welcome your email, and increasing volume only as the results stay clean.

This guide covers what to set up before the first send, a ramp you can adapt to your list, and how to respond when things go wrong.

## What should you set up before you send a single campaign?

Set up SPF, DKIM and DMARC first, with DMARC starting at **p=none** and your "From" domain aligned with SPF or DKIM. Add one-click unsubscribe headers, register the domain in Google Postmaster Tools and enrol in Yahoo's Complaint Feedback Loop. Warming up a domain with broken authentication wastes the effort.

Warming up a domain with broken authentication wastes the effort, because the reputation you build may not attach to the right identity. Work through this list first.

### Authentication

- **SPF and DKIM.** Google's [sender guidelines](https://support.google.com/a/answer/81126) require at least one of them for all senders and both for senders of 5,000 or more messages a day to Gmail. Set up both regardless of volume.
- **DKIM key length.** Google requires a key of 1024 bits or longer for mail to personal Gmail accounts and recommends 2048 bits where supported.
- **DMARC.** Required for bulk senders by Google and Yahoo. Start with a policy of **p=none** so you can watch reports without risking rejected mail, and make sure the domain in your "From" address aligns with SPF or DKIM.

Our guide to [SPF, DKIM and DMARC](https://www.cresca.xyz/blog/email-deliverability-spf-dkim-dmarc-done-right) walks through the DNS records in detail.

### Unsubscribe handling

Marketing mail should carry one-click unsubscribe headers as defined in [RFC 8058](https://www.rfc-editor.org/rfc/rfc8058): a **List-Unsubscribe** header with an HTTPS link and a **List-Unsubscribe-Post** header. The RFC requires both headers to be covered by the DKIM signature, which is one more reason to have DKIM in place first.

### Monitoring

- Register the domain in [Google Postmaster Tools](https://support.google.com/a/answer/9981691), which reports spam rate, reputation, authentication and delivery errors for mail to Gmail.
- Enrol in Yahoo's [Complaint Feedback Loop](https://senders.yahooinc.com/complaint-feedback-loop/) to receive reports when Yahoo users mark your mail as spam.

Expect Postmaster Tools to be empty at first. Google notes that data may be missing when daily volume is too low, so a blank dashboard in week one is normal, not a sign of trouble.

## Choosing the domain

Many teams send marketing from a subdomain such as **news.yourbrand.com**. This keeps marketing reputation somewhat separate from the mail your staff send day to day, while the "From" address still clearly belongs to your brand. Whatever you choose, do not register a look-alike domain to escape a bad reputation elsewhere. Providers see through that, and it makes your mail look less trustworthy, not more.

## How should you order your list during a domain warm-up?

Order it by likely engagement. Start with customers who bought or signed up recently and anyone who has replied to you, then customers active within the last year, then older contacts you have permission to email. Leave out contacts with no clear consent or no activity in years, and validate the whole list first.

Google's advice is to start with a low volume to engaged users and increase slowly. Before the first send, sort your contacts into tiers:

1. **Tier 1:** customers who bought or signed up recently, and anyone who has replied to you
2. **Tier 2:** customers active within the last year
3. **Tier 3:** older contacts you have permission to email
4. **Do not send:** contacts with no clear consent, or no activity in years

Validate the whole list before you begin. A burst of bounces in week one is the worst possible start for a domain with no history.

## What does a domain warm-up ramp look like?

There is no official schedule. The example ramp starts with a few hundred of your most recent Tier 1 contacts per day, then widens to older tiers in moderate steps, moving on only while bounces stay low, complaints do not spike and no new deferrals or blocks appear. Sending daily lets you increase faster than sending weekly.

There is no official schedule, and providers do not publish one. The plan below is an illustration of the principle, not a standard; adjust the numbers to your list size and stop increasing whenever results slip.

| Stage | Who gets mail | Move on when |
| --- | --- | --- |
| 1 | A few hundred of your most recent Tier 1 contacts per day | Several sends with low bounces and no complaint spike |
| 2 | All of Tier 1, spread over a few days | Results match stage 1 |
| 3 | Tier 1 plus the most recent part of Tier 2 | No new deferrals or blocks |
| 4 | All of Tier 2, then Tier 3 in slices | Spam rate stays well under 0.1% |
| 5 | Your normal campaign schedule | Keep monitoring weekly |

Two details from Google's guidance shape the pace. Sending daily lets you increase volume faster than sending weekly, because providers see more data points. And suddenly doubling your previous volume can cause rate limiting or a drop in reputation, so each step should be a moderate increase, not a leap. Yahoo's [sender FAQs](https://senders.yahooinc.com/faqs/) make a similar point: a sudden spike in activity can get you flagged as a compromised sender.

In Cresca, you can verify a [custom sending domain](https://www.cresca.xyz/sending-domains) with SPF and DKIM, then use scheduled sending to split a campaign across several days by segment, so each day's batch goes out without manual work. If bounce or complaint rates climb too high during the ramp, Cresca pauses sending automatically, which gives you a chance to investigate before the problem grows.

## What should you do when providers push back?

Slow down rather than push harder. For temporary deferrals, hold volume or step back one stage for several days. For rising complaints, return to more recent contacts. For bounces above your normal level, stop adding tiers and remove the contacts from that source. For a policy block, check authentication, content and recent volume instead of simply retrying.

### Temporary deferrals

If you see codes such as Gmail's [421 4.7.28](https://knowledge.workspace.google.com/admin/support/troubleshooting/gmail-smtp-errors-and-codes), which says Gmail has detected an unusual rate of email, the provider is asking you to slow down. Hold volume at the current stage, or step back one stage, for several days. Do not push harder. A good sending platform also paces delivery and retries these temporary rejections; we explain how in [why queued sending matters](https://www.cresca.xyz/blog/queued-sending-why-it-matters-at-scale).

### Rising complaints

Complaints during a domain warm-up usually mean you reached contacts who do not remember you. Return to more recent contacts and look at the source of the people who complained.

### Bounces above your normal level

Stop adding new tiers. Check where the bouncing addresses came from, remove that source's contacts, and re-validate before continuing.

### Policy blocks

A 5.7.x rejection means the provider has refused the mail on policy grounds. Check authentication first, then content, then recent volume. Do not simply retry the same message.

## After the warmup

A domain warm-up does not end with a certificate. Your reputation is built continuously from what you send, and a domain that ramped up perfectly can still be damaged by one careless import. Keep volume steady where you can, keep mailing people who want your email, and check Postmaster Tools and your campaign bounce and complaint numbers every week. For the broader picture, see the [complete deliverability guide](https://www.cresca.xyz/blog/email-deliverability-complete-guide).
